Electronics > Mechanical & Automation Engineering
Tool or its arrangement which would do opposite reaming
abdulbadii:
What is the tool or its configuration/design which would do opposite reaming: lessening a rod diameter slightly quite precisely?
Tactile need is rod diameter ~ 5 - 20 mm get lessened by 0.1-0.3 mm
themadhippy:
A Lathe
abdulbadii:
mean a portable one
T3sl4co1l:
There is such a thing as an "external reamer" but I think most hits are for pipe deburring tools, i.e. the blade geometry is conical to make a chamfer. Not a cylindrical cut.
There does still seem to be something like that, but I'm guessing it's rarely used.
I'm also guessing one like this isn't very useful outside of a lathe anyway, certainly not if you want any consistency. It looks like it's a single-point cutter too, but I can imagine one being made with multiple flutes like a regular (ID) reamer.
Tim
EPAIII:
There is no such tool in common use. But almost anything can be made. I once made a special tool to chamfer the ends of 1/4" aluminum rods. It mounted in a hand held, electric drill.
Tell us more about what you are doing. What level of precision you need? Material? Size? One time a year or thousands of pieces a day? You know, those pesky details.
--- Quote from: abdulbadii on January 10, 2023, 01:30:32 am ---mean a portable one
--- End quote ---
Navigation
[0] Message Index
[#] Next page
Go to full version