ADR1000 availability

[syau]

It show moq as 100 

[CDN_Torsten]

Have you attempted to enter "5" as the order quantity.  This worked for me...

[syau]

Have you attempted to enter "5" as the order quantity.  This worked for me...

Thanks for the hints, it works 

Shipment will be from Singapore, finger crossed.

[quarks]

because I am waiting for a solution to order without VAT#

I suggest to all who already wanted me to add them to a group buy, please feel free to jump on other group buy alternatives,
but please let me know, so I can clean out my list

[syau]

Have you attempted to enter "5" as the order quantity.  This worked for me...

Thanks for the hints, it works 

Shipment will be from Singapore, finger crossed.

As used my company address (an airline) as shipping address, ADI cancel my order saying the web order cannot be used for trader  After few email exchange, they finally approved my address and ask me to resubmit the order again.

[rigrunner]

because I am waiting for a solution to order without VAT#

I suggest to all who already wanted me to add them to a group buy, please feel free to jump on other group buy alternatives,
but please let me know, so I can clean out my list

Have you had any response from Analog suggesting they are looking into a solution?

[quarks]

Hello rigrunner,

yes, I have received an answer that they will check this.
Also I did edit my post
https://www.eevblog.com/forum/metrology/adr1000-availability/msg3693508/#msg3693508
with this information.

I guess I should not do this kind of EDIT anymore, because it can easily be overlooked.

[Cerebus]

Hello rigrunner,

yes, I have received an answer that they will check this.
Also I did edit my post
https://www.eevblog.com/forum/metrology/adr1000-availability/msg3693508/#msg3693508
with this information.

I guess I should not do this kind of EDIT anymore, because it can easily be overlooked.

Do both, edit it (making the edit obvious, as you have) and post at the end of the thread. That way anyone reading from the beginning gets the full picture sooner.

[rigrunner]

Do both, edit it (making the edit obvious, as you have) and post at the end of the thread. That way anyone reading from the beginning gets the full picture sooner.

This is a good idea. New reader will hit the update along their way through the thread and lazy people like me who read latest new posts will get there in the end.

[YetAnotherTechie]

Ordered 5 ADR1000AHZ just to see, how it is going.
Will report back, when they'll arrive.

Yes, I had to give a VAT. Because I have registered a (very) small business, I could enter a VAT here.

Please let me know any fees fedex charges you.
Also, i don't get the VAT issue, shipments outside of the US are not taxable in the US, and fedex will collect the charge from individuals when doing the import procedures, the seller doesn't have to collect VAT on orders larger than 150€, which is always the case for MOQ>5. So it should always show tax at 0% on the cart.

[harerod]

I still hate the fact that I missed out on MM2021. However, since metrology isn't even remotely my forte, I decided that the limited space was better taken by a more competent person. I hope that the situation will improve till next year.

That being said, I got really excited about the ADR1000AHZ, so I ordered ten of those analog devices. The components are shipped out of Singapore and should arrive by the end of next week. If things go as with other shipments, they will arrive in Germany early next week and will then continue to sit in customs for another week or so.

It took me a while to actually place the order, because that clown show of a website kept throwing their "witty" "Ohm my!" and other faults. https://www.eevblog.com/forum/metrology/adr1000-availability/msg3693295/#msg3693295
The issue turned out to be the Firefox 78.14.0esr that I am using as standard browser. When I switched to Microsoft Edge the placement went through like a breeze.

Edit: I didn't see the EU group buy before ordering, there was no competition intended: https://www.eevblog.com/forum/profile/?u=515694

Anyways, if a hobbyist would be interested in a single component, just write me a PM. To cover my cost, I guess I can offer those for 70€ incl. VAT plus shipping or personal pickup near Erlangen/Bamberg.
Edit: Sales and shipping limited to within Germany.
Edit: Parcel arrived on Sept. 28th. Date code 1839. No more samples devices available from me, at the moment.

[quarks]

just received an update from AD, my VAT# problem is still not solved yet, but they keep on working on it
in parallel they are in contact with Mouser (EU), maybe that will work soon and even might take away the min. order quantity of 5

[harerod]

Quote from: BU508A on 2021-09-17, 10:47:54

Ordered 5 ADR1000AHZ just to see, how it is going.
Will report back, when they'll arrive.

Yes, I had to give a VAT. Because I have registered a (very) small business, I could enter a VAT here.

Please let me know any fees fedex charges you.
Also, i don't get the VAT issue, shipments outside of the US are not taxable in the US, and fedex will collect the charge from individuals when doing the import procedures, the seller doesn't have to collect VAT on orders larger than 150€, which is always the case for MOQ>5. So it should always show tax at 0% on the cart.

The original intend of the VAT number (ger. Umsatzsteueridentifikationsnummer) was to facilitate flow of goods inside the EU common market. However, since the then, the VAT number has been serving multiple purposes. Having one elevates you over the lowest of hobbyists and implies that you intend to earn money and pay taxes. So in Germany, the VAT number stops businesses who target other businesses from asking questions.
Another interesting number is the EORI number (ger. Zollnummer), which identifies your business for customs purposes. One of those really helps with importing and exporting goods outside the EU common market.

[harerod]

YetAnotherTechie was kind enough to reply to my PM apology.
In the same message he asked a question that might be of interest to other enthusiasts, who aren't used to trading worldwide: What are the total costs?

ADI trades in US$.
My order acknowledgement is 616.70US$ for all 10 units.
Add 25US$ shipping charges (flat rate for 1..49 units, rate is given at purchase, based on destination address).
At time of purchase, the conversion rate was 1.17US$ per €uro.
My credit card surcharges 1.5% for foreign transactions.
I expect 19% VAT added by German customs. (Edit2109291041: Which are of course fully deductible for businesses.)
If FedEx is handling that, they might charge 10..20€ for their effort.
So my external cost for any one of those ten units would be 66.20 .. 68.20€.

[chuckb]

I ordered my parts last Thursday evening and selected Fed Ex 2-day shipping. They arrived today, Thursday at noon.

The parts had a few notes on the package -
Country of Diffusion - USA
Country of Assembly - Philippines, They were shipped from Singapore
Date code - 1839

Now to start testing!

[chickenHeadKnob]

Heads up to those ordering from Canada. Website is a little janky. It only gave me the option of UPS worldwide. Ordered six on Sept 20. order acknowledged on 22nd with a tracking number that did not work, even though Analog claimed the shipment was "fully delivered". Then I figured out they were using FedEx and it will arrive next Tuesday, the 28th.  Will see then.

[CDN_Torsten]

I had the same issue - website indicated UPS, but in reality it is FedEx.  I discovered this when FedEx called asking for import $$$.

Thankfully it wasn't UPS as their 'handling fees' are near-criminal.

[syau]

Received the DHL package today. Date code 2108 





Still waiting my board from OSHPARK 

[chuckb]

The first of a new date code! The second batch from the cooks.

[d-smes]

The parts had a few notes on the package -
Country of Diffusion - USA
Country of Assembly - Philippines, They were shipped from Singapore
Date code - 1839

That date code makes it seem they are shipping developmental parts from 3 years ago!  I know it takes years to qualify a new IC, but wouldn't you expect them to ship new parts rather than their limited-run qualification samples?   Or am I interpreting this wrong?

[chuckb]

I don't know how this exactly works, but I would want to do my final qualification testing on chips produced from the production diffusion equipment. I'm sure the actual development runs parts did not go to any customers.

You have to show real aging data, with production parts, to sell devices like this.

[chickenHeadKnob]

My six arrived this morning also 1839 date code.

[harerod]

My order arrived this morning, looking much like this:
https://www.eevblog.com/forum/metrology/adr1000-availability/msg3713836/#msg3713836
Date code is 1839.
I am still waiting for the invoice from the carrier/customs. I will keep you updated.

Edit: On a philosophical side note: I went shopping after posting the samples to the other forum users. At check-out I was somewhat touched when I saw what I bought for the cost of a single ADR1000AHZ in our small-town, not exactly cheap, supermarket.

[Andreas]

My order arrived this morning, looking much like this:

Did you give a VAT-number for the ordering?

with best regards

Andreas

[trophosphere]

I got my batch of 5 today from UPS.

I ordered on 9/16 (Thursday). It shipped out on 9/20 (Monday). It arrived on my doorstep on 9/28 (Tuesday). The expected receive date provided by Analog on my order confirmation e-mail was 9/30 (Thursday).

The date code for my batch was 1839.