Electronics > Metrology

calibrator reboots

(1/1)

Louis_C:
my company has a Fluke 5500A connected to a Windows 10 machine with a USB GPIB-HS adapter. We are running Fluke Met/Track 8.3.2. When I try to run ANY procedure, the calibrator will REBOOT and the runtime will error out. In NIMax, I can SEE and QUERY the calibrator with no problem. When I run NI I/O trace and watch the procedure load, all the I/O trace shows is NOADDR.

Arhigos:
Maybe try a different version of met/cal first?
There is a free 30-day trial version of met/cal 11.0 available. It will not run PROC procedures from 8.0, but PXE will be fine.

Navigation

[0] Message Index

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod