Author Topic: Thin PTFE heatshrink: is it of use to anyone here?  (Read 600 times)

0 Members and 1 Guest are viewing this topic.

Offline tggzzz

  • Super Contributor
  • ***
  • Posts: 10652
  • Country: gb
    • Having fun doing more, with less
Thin PTFE heatshrink: is it of use to anyone here?
« on: January 24, 2019, 02:24:20 pm »
I recently bought some uninteresting transparent tubing for general purpose insulation of hookup wires, but when I took some out of the packaging it felt unlike bog-standard tubing. On investigating the part number it transpires that it is more interesting PTFE heatshrink :) I've more than I need, so is anybody here interested in some?

It comes in 1m lengths, is easily kinkable, and the specs can be seen in the images or at

The images show a section that has been shrunk and one of my bits of hookup wire approx diameters 0.52mm/0.95mm. The wire was inserted after shrinking, and is a snug fit.


« Last Edit: January 24, 2019, 02:27:25 pm by tggzzz »
There are lies, damned lies, statistics - and ADC/DAC specs.
Glider pilot's aphorism: "there is no substitute for span". Retort: "There is a substitute: skill+imagination. But you can buy span".
Having fun doing more, with less
The following users thanked this post: noidea

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo