EEVblog Electronics Community Forum
Electronics => Metrology => Topic started by: jfphp on November 29, 2017, 10:16:11 pm
-
Hello,
I have joined the club of the Datron 4920 owners but mine is without the M suffix. I have read the big topic devoted to the 4920 and 4920M but it is entirely speaking about the M. I have obviously 2 blown resistors on the ADC board but my board has a lot more components and is quite different from the one (M) pictured. Therefore I am looking for the service manual of the 4920 without suffix. Thank you.
-
None available and I have looked. I bought the 4920M manual in hopes it would help but it is limited.
If you need pics of the good resistors, I can help. Upload some pics of the areas with the bad resistors and I can take photos of them.
Did yours come with the option 10?
-
Thanks for offer. Unfortunately I quickly went out of the club : the 4920 was totaly out of service : no display at all and I sent it back to the seller. Perhaps to a next occasion...