Electronics > Metrology

I have opportunity to ask Q to Mr John Pickering (Datron/Wavetek/Metron Designs)

(1/4) > >>

doktor pyta:
I have opportunity to ask questions to Mr John Pickering (Datron/Wavetek/Metron Designs).
It has to be done in a single email to save His time.  You have 14 days.

Example:
-service commands for 4700 and 4800 calibrators for dumping calibration NVRAM.
-short story of Datron
-volume of DMM and calibrators production
-personal engineering achievement You are most proud of

Kosmic:
I don't personally have any question but it's a pretty cool initiative thanks!  :-+

2N3055:
That is awfully nice both from you and him!!

If nobody asks anything more useful, the reason behind the cutouts on LTZ1000 reference PCB ?  ^-^
He should know :-)

capt bullshot:
First, just give him some congrats on the designs. I've repaired a Datron 1061A and I found the overall design quite interesting, thanks to the description of operating principles in the manual.
I've got another Datron, a 1061-S86. Maybe he knows what this option (S86) is, the only thing I found there's a "ACF" setting at the front panel, but no explanation what it's supposed to do.

picburner:
By now we all know that using the DUMP? command we can do the NVRAM backup of 1271/1281 DMMs.
I would ask him if there is a trick or a hidden command to do the restore as well.

Navigation

[0] Message Index

[#] Next page

There was an error while thanking
Thanking...
Go to full version