Author Topic: Restoration : Wavetek 4920/4920M teardown, repair and usage cases, come join!  (Read 42738 times)

0 Members and 1 Guest are viewing this topic.

Offline chinapp

  • Contributor
  • Posts: 33
  • Country: 00
is it means fix the cut trace can make the mV option  on ? :popcorn: :popcorn:
http://
 

Offline TiNTopic starter

  • Super Contributor
  • ***
  • Posts: 4543
  • Country: ua
    • xDevs.com
Making meter "detect" mV option will not magically add missing components, no?  :-//
YouTube | Metrology IRC Chat room | Let's share T&M documentation? Upload! No upload limits for firmwares, photos, files.
 

Offline chinapp

  • Contributor
  • Posts: 33
  • Country: 00
seems no more info on this ............ :scared:
http://
 

Offline meandeev

  • Regular Contributor
  • *
  • Posts: 67
  • Country: de
Hello,
was there somebody in and removed some components?!
Attached you can find a photo of the mV-option of my 4920 and also the 400978-2.5 firmware of this device (Sticker says 2.5, inside the firmware you can find the number 2.05)
 

Offline chinapp

  • Contributor
  • Posts: 33
  • Country: 00
thanks so much for your pic

it seems not a big problem, could you give a view of the five  transistors? can not get the model of them,and also the foil resistor beside the fuse
http://
 

Offline chinapp

  • Contributor
  • Posts: 33
  • Country: 00
recently research update >>>

the main board of none mV option 4920 is different to the mV option added 4920,so it seems there is no way to update  :(
http://
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf