Microcontrollers

[AVR] programming two AVR's that are connected together on the SPI bus

[AVR] pin change interupts (PCINT)

[AVR] Perplexed with PROGMEM-stored pointers to functions

[AVR] Must multiply the TCNT1 value by 8 for accuracy !!

[AVR] max clock frequency

[AVR] Low-frequency output from a timer below what prescalers give

[AVR] LIN bus on the ATmega 0 series

[AVR] is it worth using the ADC interrupt to multitask

[AVR] Implementing a non-blocking UART getchar()

[AVR] How to monitor external circuitry for a car project? ATMega 8-bit

« 1 2  All »

[AVR] Does UPDI need a +Vcc?

[AVR] Display updating at wrong rate not sure why

[AVR] Cannot get the ADC value in Atmel Studio ! ADC register is not working

[AVR] Buffer overflow leads to MCU reset - by what mechanism does this occur?

[AVR] Basic WS2811 interfacing (addressable RGB leds)

[AVR] ADC oversampling function

« 1 2  All »

[AVR-DA] ADC doesn't trigger on negative runt pulse?

[AVR MEGA series 0] USART stops sending at 5 bit

[AVR Mega 0 series] interrupt vectors

[AVR GCC] Error called object is not a function or function pointer

« 1 2 3  All »

[AVR C] which register names to use

[ATSAMD10D13AS] Sleep mode and receiving multiple data packets with I2C

[Atmel studio] won't accept !==

« 1 2 3 4  All »

[ATMEGA328] Recommend me a fast PID library? - brushless servo control

[ATmega 0] The evnt system register names mystery

[ATmega 0] register confusion

« 1 2 3 4  All »

[ATmega 0] clock confusion

[ATmega 0] 'TCAt {aka union TCA union}' has no member named 'CTRLA'

[ATmega 0] - because I am not flipping clairvoyant input captures pins?

[atmega 0-series] random missing '(' and ')' error

[Atmega 0-series] EEPROM workings

[ATmega 0-series] counter woes

[atmega 0-series] 'TCA_t {aka union TCA_union}' has no member named 'INTCTRL'

[ATMega 0 series]

[ARM] optimization and inline functions

« 1 2 3 4  All »

[ARM] Does a USB device need a driver on the Host Microcontroller to get power?

[ARM] [Sam] Uh is it a good idea to map registers to structs

« 1 2  All »

[Arduino]Trouble with eth shield & relay shield

[arduino] what µCU can a newbie program with/through Arduino?

[Arduino] Multiplexing Questions