EEVblog Electronics Community Forum
A Free & Open Forum For Electronics Enthusiasts & Professionals
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email
?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
This topic
This board
Entire forum
Google
Bing
Home
Help
Search
About us
Links
Login
Register
EEVblog Electronics Community Forum
»
Electronics
»
Microcontrollers
»
Audio line output for SBC OLimex LIME2
« previous
next »
Print
Search
Pages: [
1
]
Go Down
Author
Topic: Audio line output for SBC OLimex LIME2 (Read 1553 times)
0 Members and 1 Guest are viewing this topic.
more2000
Newbie
Posts: 1
Country:
Audio line output for SBC OLimex LIME2
«
on:
June 19, 2016, 11:23:42 am »
Hi guys,
So I need to connect a speaker to a Olimex LIME2
www.olimex.com/wiki/A20-OLinuXino-LIME2
via the HPOUT/R/L/COM audio lines, I'm using just one speaker because it is for a hand held device and just one speaker does the job.
This circuit is for a Olimex LIME2 (without this circuit)
https://github.com/OLIMEX/OLINUXINO/blob/e1977354d5f500dfb903ca76b9d25543640f79c4/HARDWARE/A20-OLinuXino-LIME2/A20-OLinuXino-Lime2_Rev_C.pdf
based on the Olimex micro (
https://github.com/OLIMEX/OLINUXINO/blob/master/HARDWARE/A20-OLinuXino-MICRO/A20-OLINUXINO-MICRO_4GB_Rev_G1.pdf
) which is based on the official Allwinner A20 PAD (Page 19,
https://github.com/OLIMEX/OLINUXINO/blob/master/HARDWARE/A20-PDFs/A20_PAD_STD_V1_1.rar
).
The problem is that I don't have the
Ferrite Beads
.
And I don't really understand the circuit so I don't feel like wiring it without the Ferrite Beads ...
I understand that:
Ferrite bead filter out the high frequencies that could came back for the amp when you connect the speaker for example, but not when they go out from the line outs?
If I wire it without the ferrite bead does it make any sense?
I'm testing the wiring without the ferrite bead with a cellphone but when I connect the circuit ground to the amp ground it doesn't make any sound. ¿?
Will it
break the SOC
if a wire the pins to the amp directly without the RC/FB protection?
A ton of doubts and a hell to break?.
Thanks on advance and cheers.
Logged
Print
Search
Pages: [
1
]
Go Up
« previous
next »
Share me
Smf
EEVblog Electronics Community Forum
»
Electronics
»
Microcontrollers
»
Audio line output for SBC OLimex LIME2
There was an error while thanking
Thanking...
EEVblog Main Site
EEVblog on Youtube
EEVblog on Twitter
EEVblog on Facebook
EEVblog on Odysee