However, on your boar we need first to solve the WL1
the missing R32 is for WL1, so it should in principle work even without that resistor.
When on, the first MAX IC should provide 1V (on C6/C4), the second MSX IC 3.3V (on C5/C7)
Your U6 didn't look "nice", it should produce 12V (on TPS4, always avilable).
On TPS1 there should be 3.3V when on.
On TPS5 (near FPGA) you should have 2.5V when on.
On bottom side, near FPGA JTAG, on C126 you should measure 1.8V
This are the important voltages, everything else is less important (as for the PS1000).
Btw. in my email i said
R24=11.01k but that was wrong, it is of course 1.1k. The R25 remains 7.5k