EEVblog® Electronics Community Forum

Electronics => Microcontrollers => Topic started by: Deepika on October 14, 2016, 11:19:06 am

Title: Debugging with Chipscope
Post by: Deepika on October 14, 2016, 11:19:06 am

Hi,

I am trying to debug my ALU design in FPGA. I am using trigger immediate option after downloading the bit stream to FPGA. But the chipscope never displays the signal values starting from program counter=0 and the waveform starts from some other value of program counter. How to resolve this issue, I need to capture real time data.

Thanks