Author Topic: DIY scale with 5 mg resolution using HX711 and Arduino  (Read 3742 times)

0 Members and 1 Guest are viewing this topic.

Offline stoppi

  • Contributor
  • Posts: 8
  • Country: at
DIY scale with 5 mg resolution using HX711 and Arduino
« on: November 19, 2016, 07:05:50 pm »
Hello!

One of my latest small Projects, a homemade scale using arduino and the HX711. The load cell is a 100g-type and the realistic resolution is about 5 mg because of the noise. I hope you like it  ;)

My YouTube-channel: https://www.youtube.com/user/stopperl16/videos


 
The following users thanked this post: thm_w

Offline Houseman

  • Regular Contributor
  • *
  • Posts: 65
  • Country: it
Re: DIY scale with 5 mg resolution using HX711 and Arduino
« Reply #1 on: February 05, 2017, 11:01:00 pm »
Hey, nice video.
How did you obtain such a good results?
I am trying to make the same but I have crazy results, Numbers tend to jump around even with doing the tare due to the noise and the values are not stable.
Can you please share the code shown in the video? Best regards and thanks.
Steve
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf