EEVblog Electronics Community Forum
Electronics => Microcontrollers => Topic started by: legacy on January 20, 2016, 07:51:22 pm
-
hi guys
I am a bit confused and I am not able to find a good document
I have to reprogram, or to emulate, a chip that is used to provide the MAC-address to a UNIX box
this chip is called "DS1981U", it communicates with the economy of one signal plus ground (and probably it's read only)
someone experienced ?
-
~= 1-Wire device
-
What I want to do is make an MPU or a CPLD to become a slave on the 1-wire bus, with DS1981U command list for its specific functions.