Author Topic: EFB-REV1 - Survellance System  (Read 214 times)

0 Members and 1 Guest are viewing this topic.

Offline Victor_90

  • Newbie
  • Posts: 1
  • Country: us
EFB-REV1 - Survellance System
« on: June 12, 2019, 03:48:01 am »
"I would like to make a survellance system using ELB- REV4. How can I interface the following Pi Camera?
https://thepihut.com/products/raspberry-pi-camera-module
Will I need any specific drivers for this?"
 

Offline helenaandrews1987

  • Newbie
  • Posts: 1
  • Country: gb
Re: EFB-REV1 - Survellance System
« Reply #1 on: June 12, 2019, 09:34:45 pm »
There are many ways you can interface multiple type of camera for example you can use any USB camera to interface over USB port with ELB-REV4 or you can configure multiple pins on the header P8,P9 to suit to interfaces of camera module.

Regards

Helena Andrews
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf