Hello,
Not long ago I have purchased a NodeMCU module from Aliexpress in order to teach myself about FreeRTOS.
I'm unable to get this example to work on it:
https://github.com/espressif/ESP8266_RTOS_SDK/tree/master/examples/smart_configWhen running ./gen_misc.sh I use default values, except for the SPI_SIZE_MAP where I chose 4.
I got the following output:
---
!!!
SDK_PATH: /home/denis/Development/ESP8266_RTOS_SDK
BIN_PATH: /home/denis/Development/ESP8266_RTOS_SDK/bin
No boot needed.
Generate eagle.flash.bin and eagle.irom0text.bin successully in BIN_PATH
eagle.flash.bin-------->0x00000
eagle.irom0text.bin---->0x20000
!!!
---
And I've tried the following commands, each one without success:
esptool.py write_flash 0x00000 eagle.flash.bin 0x20000 eagle.irom0text.bin 0x7E000 blank.bin // Led blinks rapidly
esptool.py write_flash 0x00000 eagle.flash.bin 0x40000 eagle.irom0text.bin 0x7E000 blank.bin // Led doesn't blink however smart config doesn't work.
esptool.py write_flash 0x00000 eagle.flash.bin 0x20000 eagle.irom0text.bin // Led blinks rapidly
I've also tried to flash the blinky example from esp-open-sdk, didn't work, led started blinking but not according to the code.
Could anybody tell me what I'm doing wrong? My board is: V3 Wireless module NodeMcu 4M bytes Lua WIFI Internet of Things development board based ESP8266 esp-12e