EEVblog® Electronics Community Forum

Electronics => Microcontrollers => Topic started by: rakeshm55 on March 22, 2019, 04:56:34 am

Title: Interface compact flash to Processor memory interface
Post by: rakeshm55 on March 22, 2019, 04:56:34 am
How to interface compact flash to memory interface of a processor?? eg GPMC interface
Is the interface similar to NAND??...

How hard is it to bring up the interface

Please share some example designs for the same... If OS like linux in involved is it advisable to choose such an interface for Kernel as long as there is no support??
Title: Re: Interface compact flash to Processor memory interface
Post by: viperidae on March 22, 2019, 05:13:40 am
Compact flash uses a standard ATA interface like an old ide hard drive
Title: Re: Interface compact flash to Processor memory interface
Post by: rakeshm55 on March 22, 2019, 07:34:33 am
Wont it allow for 8bit 16 bit access from Host machine??  other than true IDE mode
PC Card Memory Mode, PC card IO mode


like Common Memory Mode or I/O mode
http://pdf.datasheetcatalog.com/datasheet/MitsubishiElectricCorporation/mXyzqtuu.pdf (http://pdf.datasheetcatalog.com/datasheet/MitsubishiElectricCorporation/mXyzqtuu.pdf)
Title: Re: Interface compact flash to Processor memory interface
Post by: legacy on March 22, 2019, 10:25:41 am
Compact flash uses a standard ATA interface like an old ide hard drive

CF-ATA, electrically it's the same, but it's a subset of the protocol.

(http://www.downthebunker.xyz/wonderland/chunk_of/stuff/public/projects/sonoko-x11/router-board/rb532-mobo.jpg)

I know because we (at DTB) are using a router for a project (http://www.downthebunker.xyz/wonderland/reloaded/bazaar/viewtopic.php?f=36&t=133&st=0&sk=t&sd=a&sid=f9a16269dde59de66565dd6b16bd9edd&start=20) with a CF interface, and ... we had to modify the ata-kernel-module with patches specific for the CF-ATA.