EEVblog Electronics Community Forum

Electronics => Microcontrollers => Topic started by: technix on May 14, 2021, 03:43:00 am

Title: Is it possible to build an AM3352 boot image without CCS?
Post by: technix on May 14, 2021, 03:43:00 am
As the title suggests, I'd like to do that and flash that (partial) image into my ex-AntMiner modded BBB with 8GB raw NAND boot device.
Title: Re: Is it possible to build an AM3352 boot image without CCS?
Post by: abyrvalg on May 14, 2021, 07:59:00 am
I’ve heard Buildroot can build all boot stages (including MLO/u-boot) for BeagleBone without CCS.
Title: Re: Is it possible to build an AM3352 boot image without CCS?
Post by: technix on May 14, 2021, 09:41:46 am
I’ve heard Buildroot can build all boot stages (including MLO/u-boot) for BeagleBone without CCS.
This is awesome news, although what I want is a Debian-based distribution built without CCS. Maybe what I should do is start with building just the MLO and u-boot outside CCS, just make sure it can net-boot later.