Electronics > Microcontrollers

Modern day M68K development

(1/3) > >>

Gribo:
Hello all,
 I got a task to develop test firmware for a board with a 68332 MCU, I have the PEmicro Multilink FX adapter, and would like to setup a toolchain. Sadly, Codesourcery lite is no longer available.

What are my options? I am using windows 10.

bingo600:

Untested by me , but a search for GCC coldfire brings up some stuff.

https://crosstool-ng.github.io/

The DL link in here seems to work
http://download.ronetix.info/toolchains/coldfire/m68k_cross_development_guide.pdf

https://www.nxp.com/design/software/development-software/codewarrior-development-tools/codewarrior-legacy/codewarrior-development-studio-for-coldfire-architectures-linux-editions-classic-ide-v2-5:CW-COLDFIRE-LINUX

https://github.com/haarer/toolchain68k

https://gnutoolchains.com/m68k-elf/


/Bingo


SiliconWizard:
I have used the toolchain provided here: https://gnutoolchains.com/m68k-elf/
and it works fine.

Gribo:
Thanks for the info.
I have installed the toolchain, and got Eclipse to create a project with all the headers, now it seems I am missing some resources.
I installed version 4.8 of the toolchain.

Harjit:
There is some good information here: https://wiki.control.fel.cvut.cz/nms/cpuarch/m68k/mo_cpu2-quick-start.html

Has anyone found an inexpensive USB BDM tool? This is for a hobby project.

Navigation

[0] Message Index

[#] Next page

There was an error while thanking
Thanking...
Go to full version