Author Topic: The STM32 unwantedly locks or it goes on the bootloader mode  (Read 398 times)

0 Members and 1 Guest are viewing this topic.

Offline VanitarNordic

  • Frequent Contributor
  • **
  • Posts: 276
  • Country: 00
The STM32 unwantedly locks or it goes on the bootloader mode
« on: January 13, 2019, 08:23:44 pm »
I have an STM32F103C8 chip.

as we know and it is written in the datasheet, if we want to load from flash, we have to pull down the BOOT0 pin with a 10K resistor.

But in my case, when I pull it down, after a few flash erasing/programming, the MCU suddenly locks. Then I have to pull it up, go to the bootloader (using USART1) and erase the flash to unlock it. It was happening frequently till I left the BOOT0 pin float and after that nothing happened and everything is normal.

Why this happens?, weird  ??? ???
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf