Author Topic: Fujitsu MB90F342CAS mcu, how to clone?  (Read 578 times)

0 Members and 1 Guest are viewing this topic.

Offline tru3533

  • Regular Contributor
  • *
  • Posts: 74
  • Country: no
Fujitsu MB90F342CAS mcu, how to clone?
« on: January 14, 2019, 07:08:26 am »
Need to clone a Fujitsu MB90F342CAS mcu
From what I can see the mcu have RS232 serial com, and by pulling MD0 low a boot loader should be active after restart.

Mcu also have security pins, not able to confirm if set.

So question is: Is there a way to clone this MCU? and what software to use?

Thank you in advance
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf