Electronics > Microcontrollers

pin mapping on dsPIC33F

(1/1)

NiHaoMike:
On the dsPIC33F, is it possible to map a pin to be an output of one module (output compare) and an input of another module (timer) at the same time? I'm trying to derive two synchronized clocks for a data acquisition circuit, one of which is the master clock of the ADCs and the other commands a conversion. The second clock is about 1/20th or so the frequency of the first, synchronized such that its falling edge happens when the first clock is low.

johnmx:
Yes it is.

Navigation

[0] Message Index

There was an error while thanking
Thanking...
Go to full version