Stellaris Launchpad Logic Analyser

[HackedFridgeMagnet]

As somebody pointed out, a logic analyser might be a good use for your Stellaris Launchpad.
So I gave it a go.

http://www.fischl.de/arm/sllogiclogger_logic_analyser_for_stellaris_launchpad/

the protocol is I2C talking to a ds1307
So the analysis doesn't quite work yet, but my data seems to be coming in albeit with some ugly spikes.
And I have remote debugging on the launch pad if I needed it.
My bus pirate decodes the same data ok so I am not sure what is going on.
One day I will look a bit deeper.

[ve7xen]

Looks like the decoder has detected SCL/SDA incorrectly, you'll probably need to set those manually.

[HackedFridgeMagnet]

Yes that was the case, I turned off auto detect,  and I have less errors.
 

[Skimask]

WOW!  Great find!  And just when I was wanting one...
I've got 3 of these Launchpad's sitting here at the bench waiting for an application like this.

[BravoV]

Its about time my launchpad to be loaded with decent app rather than noob apps all this time. 

Thanks ! 

[Skimask]

Its about time my launchpad to be loaded with decent app rather than noob apps all this time. 

I resemble that remark! 

[ve7xen]

Yes that was the case, I turned off auto detect,  and I have less errors.

Seem to correspond with the glitches on your SDA line. They look like legit errors to me.

[bingo600]

As somebody pointed out, a logic analyser might be a good use for your Stellaris Launchpad.

Guilty as charged 

/Bingo