EEVblog Electronics Community Forum

Electronics => Microcontrollers => Topic started by: jonathan_nadar on October 17, 2021, 04:42:46 pm

Title: USB Type C interfacing with STM32F7
Post by: jonathan_nadar on October 17, 2021, 04:42:46 pm
I need to connect the data pins of USB and STM32 so that I can program the microcontroller in DFU mode. I am using a Type C USB port (requested by the customer) and I am finding it difficult to figure out a way to interface it. Should I connect the two sets of differential pair pins of the USB together and use them?
Title: Re: USB Type C interfacing with STM32F7
Post by: wek on October 17, 2021, 08:51:39 pm
[attachimg=1]
Title: Re: USB Type C interfacing with STM32F7
Post by: SiliconWizard on October 17, 2021, 10:59:00 pm
This is a common question. You can refer to this thread as well: https://www.eevblog.com/forum/projects/usb-type-c-(usb2-0)-wiring/ (https://www.eevblog.com/forum/projects/usb-type-c-(usb2-0)-wiring/)