Author Topic: ESP32 Wrong boot mode detected (0x13)! error  (Read 836 times)

0 Members and 1 Guest are viewing this topic.

Offline kuzm1nsk1Topic starter

  • Contributor
  • Posts: 34
  • Country: hr
ESP32 Wrong boot mode detected (0x13)! error
« on: October 21, 2025, 03:41:06 pm »
Hi,

after a few months away from ESP32 programming I noticed that Arduino IDE doesn't automatically upload the code to the board like it used to do before. Now i get this error:

A fatal error occurred: Failed to connect to ESP32: Wrong boot mode detected (0x13)! The chip needs to be in download mode.
For troubleshooting steps visit: https://docs.espressif.com/projects/esptool/en/latest/troubleshooting.html

Yes, I tried pressing the BOOT or ENABLE button and adding a 10uF capacitor between EN pin and GND and both solutions work. On my other PC I don't have to do anything and it uploads the code without any errors so it bothers me why my main PC can't act the same. They both have Windows 11, same CP2102 driver and Arduino IDE versions. Could it be some software or hardware error? I tried everything that I could find online and nothing worked. Has anybody encountered the same problem and found some solution to it?
 
 

Offline JPortici

  • Super Contributor
  • ***
  • Posts: 3923
  • Country: it
Re: ESP32 Wrong boot mode detected (0x13)! error
« Reply #1 on: October 22, 2025, 01:26:32 pm »
could be the wrong driver for the programmer.
ESP tools require the flow control pins to juggle the boot and reset bits and many drivers don't really implement flow control.. (I did have that issue when i first started ESP32 development on my windows pc)
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf

 

- - -
-->