Author Topic: Arduino Uno R3 with MSO-19 Scope  (Read 3179 times)

0 Members and 1 Guest are viewing this topic.

Offline oldy99Topic starter

  • Newbie
  • Posts: 1
Arduino Uno R3 with MSO-19 Scope
« on: September 26, 2013, 04:33:05 am »
I have the Arduino plugged into a USB socket on my Acer Aspire netbook and the MSO-19 into an adjacent USB socket. Before connecting the probe ground to the Arduino Gnd, I measured the voltage from probe ground and Arduino Gnd and noted that the MSO-19 ground was about 0.3 volts more positive than Arduino Gnd. I suspect it has something to do with how gnd and ugnd are treated in USB circuits. In the Arduino there is device between ugnd and gnd whose symbol looks like 2 half moons back to back. Don't know what that is. I also don't know what the USB circuit that Link Instruments use in their MSO-19 looks like that would account for this difference. Can someone out there help me understand what is going on? I feel quesy about connecting 2 points of different voltage together.

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo