Author Topic: OrangeHat - Raspberry Pi Robot Hat  (Read 10500 times)

0 Members and 1 Guest are viewing this topic.

Offline 05032-Mendicant-BiasTopic starter

  • Newbie
  • Posts: 1
  • Country: it
  • Helios. Has. Spoken.
OrangeHat - Raspberry Pi Robot Hat
« on: January 08, 2022, 01:28:26 pm »
Hello EEVblog

I have been working quite a while on a Raspberry Pi hat for robotics as an hobby, I discovered this blog while searching for information and I thought I'd share here the progress.

After trying lots of boards, I decided to focus on the Raspberry Pi for the compute because of power consumption and software available, I'm developing an hat to integrate all the electronics needed for a robot on a single board. Specs:
  • XT60 Power connector
  • 5V3A regulator channel for the Rasperry Pi
  • Servomotors with a dedicated 5V3A regulator channel
  • ATMega 4809 microcontroller
  • Three channel voltage and current monitor
  • Screen
  • Communication Bus (right now RS485, but I'm evaluating CAN)

I release all relevant code and gerber open source, here the github repository:

OrangeHat assembled and powered as of 2022-01

OrangeHat installed on a simple bot as 2022-01

Youtube video of a simple OrangeHat powered bot moving
« Last Edit: January 08, 2022, 01:36:31 pm by 05032-Mendicant-Bias »

Offline Leslie

  • Newbie
  • Posts: 1
  • Country: cn
Re: OrangeHat - Raspberry Pi Robot Hat
« Reply #1 on: January 27, 2022, 04:45:04 am »
Impressed project! looking forward updates! how about to use a small oled display instead of the big lcd?

Offline rooppoorali

  • Regular Contributor
  • *
  • Posts: 100
  • Country: bd
Re: OrangeHat - Raspberry Pi Robot Hat
« Reply #2 on: August 14, 2022, 02:48:50 pm »
Along with Maze solver, what are the common robots that we can make with this hat?

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo