Electronics > Open Source Hardware
Chinese TC1 transistor tester
cdev:
I still get so much use out of mine, possibly its because its so easy to use and always gives a usable and thought provoking answer of what it sees the DUT as being. Its not always what I think its going to tell me. Not at all.
nigelwright7557:
--- Quote from: cdev on December 25, 2021, 10:43:01 pm ---I still get so much use out of mine, possibly its because its so easy to use and always gives a usable and thought provoking answer of what it sees the DUT as being. Its not always what I think its going to tell me. Not at all.
--- End quote ---
While battery powered transistor testers do have their uses the test current can be little more than useless.
Some use as little as 2mA to test a transistor.
Normal working current for some transistors can be amps which is a totally different area of operation.
Hfe at 2mA can be very different to Hfe at 5 amps.
Kim Christensen:
--- Quote from: distefanom on December 21, 2021, 06:41:09 pm ---This is the exact tester I need to repair
TC-1 schematic.JPG
--- End quote ---
Did you create the schematic yourself by reverse engineering your broken unit?
distefanom:
Sorry for my late answer, but the schematic is exactly the one I posted above
:)
Navigation
[0] Message Index
[*] Previous page
Go to full version