Author Topic: Clone Open-source digital oscilloscope "ScopeFun"  (Read 2849 times)

0 Members and 1 Guest are viewing this topic.

Offline AndreZheng

  • Contributor
  • Posts: 17
  • Country: cn
Clone Open-source digital oscilloscope "ScopeFun"
« on: May 02, 2020, 01:13:24 pm »
May 02, 2020
 ;D
Hola. I made a USB 3.0 + Artix-7 + DDR3 Core board. And now I want to add a daughter board with high speed ADC. Any recommendation for ADCs? How about HMCAD1511 which costs around 10$?
BTW, if I use the firmware/software developed by ScopeFun designer, shall I also open source my hardware design source file? Thanks

JULY 12, 2020
The USB3.0(CYUSB3014) + Artix-7(XC7A35T) + 512MB DDR3 core board is ready.  >:D
https://github.com/ChinaQMTECH/Artix7_USB3.0_Development_Board
« Last Edit: July 13, 2020, 01:47:16 pm by AndreZheng »
 

Offline OwO

  • Super Contributor
  • ***
  • Posts: 1234
  • Country: cn
  • RF Engineer. Discord: https://discord.gg/SYZ4WwH9Z
Re: Clone Open-source digital oscilloscope "ScopeFun"
« Reply #1 on: May 02, 2020, 02:00:15 pm »
P O S T  S C H E M A T I C S  A N D  L A Y O U T S please.
Discord: https://discord.gg/SYZ4WwH9Zu
Email: OwOwOwOwO123@outlook.com
GitHub: gabriel-tenma-white
 

Offline aussie_laser_dude

  • Contributor
  • Posts: 44
  • Country: au
Re: Clone Open-source digital oscilloscope "ScopeFun"
« Reply #2 on: May 02, 2020, 11:25:59 pm »
I'd be interested to see any open source stuff, currently trying to make my own version for fun.
 

Offline ADLab

  • Newbie
  • Posts: 2
  • Country: be
Re: Clone Open-source digital oscilloscope "ScopeFun"
« Reply #3 on: May 03, 2020, 07:37:16 pm »
hi,

Here is a web-based oscilloscope DIY using beaglebone black and Spartan-6 FPGA. It's based on our master thesis 5 years ago. Finally, we are allowed to distribute it.
https://hackaday.io/project/171379-web-based-oscilloscope-diy-using-beaglebone-black

The DSO part features 8 bits, 250 MS/s, 100 MHz bandwidth, dual channels, external trigger, no troublesome software installation (only web browser needed), software control panel and WiFi-range connectivity.
 
The following users thanked this post: croma641

Offline wizard69

  • Frequent Contributor
  • **
  • Posts: 930
  • Country: us
Re: Clone Open-source digital oscilloscope "ScopeFun"
« Reply #4 on: June 08, 2020, 08:46:55 am »
If you want to distribute the software in any way you should make it open source.   If this is a personal one off project it doesn't matter.    It  might be worth seeing of the ScopeFun developers are interested in supporting other boards.   There are advantages and disadvantages to haveing one software base support multiple hardware solutions.


In any event it would be interesting to see your documentation and code.
;D
Hola. I made a USB 3.0 + Artix-7 + DDR3 Core board. And now I want to add a daughter board with high speed ADC. Any recommendation for ADCs? How about HMCAD1511 which costs around 10$?
BTW, if I use the firmware/software developed by ScopeFun designer, shall I also open source my hardware design source file? Thanks
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf