Author Topic: Making USB3.0 1080p Auto focus camera with Acutelogic PE1005, 1Gbps UVC Stream  (Read 1639 times)

0 Members and 1 Guest are viewing this topic.

Offline RoadRunnerTopic starter

  • Frequent Contributor
  • **
  • Posts: 382
  • Country: de
There has been quite progress from other forum members but i still felt tempted to interface this camera to USB3.0 with FX3 so here is little story of success. i have also received few camera modules from Mjolinor , but only one of them was able to survive shipping. 

I implemented opensource USB UVC firmware so that any application that support UVC can stream almost 1Gbps full HD 1080p video Over cypress FX3 USB 3.0.

Camera output has little odd output timing which has been handled by FX3 GPIF frontend.

Images attached to this message shows image quality is really nice.

Complete description, PCB ,Firmware source with more description and images are available on my blog.

https://www.circuitvalley.com/2020/02/diy-usb-3-1080-full-hd-camera-PE1005-auto-focus-optical-zoom-cypress-fx3-usb.html

Addition Video Details to the project.

 
The following users thanked this post: marks2c


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf