Author Topic: Open Hardware STM32MP1 System On Module + MB [Work In Progress]  (Read 1683 times)

0 Members and 1 Guest are viewing this topic.

Offline IIOSOH

  • Contributor
  • Posts: 8
  • Country: bg
Hello,

I am working on an Open Hardware STM32MP1 System on module in my spare time for a few months now.
I’ve described my motivation behind the project and what my goals are in the GitHub repository.

I’d appreciate it if you spare some time to look at the “Discussions” tab in the repository and vote in the two polls i created.

https://github.com/RavnaPCB
 

Offline Doctorandus_P

  • Super Contributor
  • ***
  • Posts: 2382
  • Country: nl
Re: Open Hardware STM32MP1 System On Module + MB [Work In Progress]
« Reply #1 on: July 23, 2022, 02:59:38 pm »
Creating a PCB project around an STM32MP1xx is an quite impressive project.

Do you know that Olimex is also working on this?
https://www.olimex.com/Products/OLinuXino/STMP1/open-source-hardware
They have also written a few times about it on their blog, I remember one of the post about long delays because of chipageddon.
https://olimex.wordpress.com/?s=stm32mp1

Olimex is also very friendly towards open source / hardware and they have released quite a lot of their projects on github (older projects in eagle, newer in KiCad).
I just had a look at https://github.com/OLIMEX/STMP1-OLinuXino and I was a bit surprised that the project has not been updated for 3 years. The schematic looks fairly complete, and footprints are placed on the PCB, but not much of the routing is done. I'm guessing this is not intentionally but it just slipped in between the cracks somehow.

Olimex also has  a forum section dedicated to this processor. It may be a useful place to look what others are doing with it.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf

 



Advertise on the EEVblog Forum