Electronics > Open Source Hardware

Open Hardware STM32MP1 System On Module + MB [Work In Progress]

(1/1)

IIOSOH:
Hello,

I am working on an Open Hardware STM32MP1 System on module in my spare time for a few months now.
I’ve described my motivation behind the project and what my goals are in the GitHub repository.

I’d appreciate it if you spare some time to look at the “Discussions” tab in the repository and vote in the two polls i created.

https://github.com/RavnaPCB

Doctorandus_P:
Creating a PCB project around an STM32MP1xx is an quite impressive project.

Do you know that Olimex is also working on this?
https://www.olimex.com/Products/OLinuXino/STMP1/open-source-hardware
They have also written a few times about it on their blog, I remember one of the post about long delays because of chipageddon.
https://olimex.wordpress.com/?s=stm32mp1

Olimex is also very friendly towards open source / hardware and they have released quite a lot of their projects on github (older projects in eagle, newer in KiCad).
I just had a look at https://github.com/OLIMEX/STMP1-OLinuXino and I was a bit surprised that the project has not been updated for 3 years. The schematic looks fairly complete, and footprints are placed on the PCB, but not much of the routing is done. I'm guessing this is not intentionally but it just slipped in between the cracks somehow.

Olimex also has  a forum section dedicated to this processor. It may be a useful place to look what others are doing with it.

Navigation

[0] Message Index

There was an error while thanking
Thanking...
Go to full version