Electronics > Open Source Hardware
OrangeHat - Raspberry Pi Robot Hat
(1/1)
05032-Mendicant-Bias:
Hello EEVblog
I have been working quite a while on a Raspberry Pi hat for robotics as an hobby, I discovered this blog while searching for information and I thought I'd share here the progress.
After trying lots of boards, I decided to focus on the Raspberry Pi for the compute because of power consumption and software available, I'm developing an hat to integrate all the electronics needed for a robot on a single board. Specs:
* XT60 Power connector
* 5V3A regulator channel for the Rasperry Pi
* Servomotors with a dedicated 5V3A regulator channel
* ATMega 4809 microcontroller
* Three channel voltage and current monitor
* Screen
* Communication Bus (right now RS485, but I'm evaluating CAN)
I release all relevant code and gerber open source, here the github repository:
github.com/OrsoEric/OrangeHat
OrangeHat assembled and powered as of 2022-01
OrangeHat installed on a simple bot as 2022-01
Youtube video of a simple OrangeHat powered bot moving
Leslie:
Impressed project! looking forward updates! how about to use a small oled display instead of the big lcd?
rooppoorali:
Along with Maze solver, what are the common robots that we can make with this hat?
Navigation
[0] Message Index
Go to full version