Author Topic: Electronic Resources - YouTube - Websites  (Read 188810 times)

0 Members and 1 Guest are viewing this topic.

Offline ez24Topic starter

  • Super Contributor
  • ***
  • Posts: 3082
  • Country: us
  • L.D.A.
Re: Electronics Resources - YouTube - Websites
« Reply #100 on: January 19, 2018, 06:42:50 pm »
If it's ok, the description of my channel (Brian Lough) is misc, but something like Arduino would probably be closer to what it was.

I think I had some live streams recording of a making a guitar pedal when I first added the channel here, I've since tidied it up to reflect my usual content

Thanks

Congratulations  :-+ :-+ :-+   You are the first one to ask me to change the info.  It has been kinda discouraging that no one has ask me before.  So you made my day  :-+ 

Do you want me to change General Content to Arduino?  If so what do you want under Addtional Info ?

I get Additional Info from YT "About" page.  Yours is empty.

I will make the changes later - the spreadsheet is currently under work by Brumby

Thanks

YouTube and Website Electronic Resources ------>  https://www.eevblog.com/forum/other-blog-specific/a/msg1341166/#msg1341166
 
The following users thanked this post: witnessmenow

Offline Cliff Matthews

  • Supporter
  • ****
  • Posts: 1910
  • Country: ca
    • General Repair and Support
Re: Electronics Resources - YouTube - Websites
« Reply #101 on: January 19, 2018, 07:01:45 pm »
What about the post above that one? Do I get a back scratch as well?  :-// 
(wait, I'm not a dog.. and it wasn't even my channel..  :palm: )
 
The following users thanked this post: ez24

Offline Cliff Matthews

  • Supporter
  • ****
  • Posts: 1910
  • Country: ca
    • General Repair and Support
Re: Electronics Resources - YouTube - Websites
« Reply #102 on: January 20, 2018, 01:42:55 am »
Hi Roger, good job as always sir! Here's a another EEVbloger Xyphro with 24 subs and test equipment / micro-controllers on his channel:
https://www.youtube.com/channel/UCzgLjn8hD35McE26p6paGQA/videos
 
The following users thanked this post: ez24

Online Brumby

  • Supporter
  • ****
  • Posts: 12281
  • Country: au
Re: Electronics Resources - YouTube - Websites
« Reply #103 on: January 20, 2018, 07:34:32 am »
I won't treat you like a dog, Cliff ... but I will give you a pat on the back for being consistently involved in this endeavour.

Not forgetting ez24 of course.



.... which reminds me - I still have a spreadsheet to fix.   :-[
 
The following users thanked this post: Cliff Matthews, ez24, TheDane

Online Brumby

  • Supporter
  • ****
  • Posts: 12281
  • Country: au
Re: Electronics Resources - YouTube - Websites
« Reply #104 on: January 20, 2018, 09:06:54 am »
<Sample removed. It has served it's purpose.>

<Attachment removed. It has served it's purpose.>
« Last Edit: January 22, 2018, 04:14:33 am by Brumby »
 
The following users thanked this post: ez24

Online igendel

  • Frequent Contributor
  • **
  • Posts: 359
  • Country: il
    • It's Every Bit For Itself (Programming & MCU blog)
Re: Electronics Resources - YouTube - Websites
« Reply #105 on: January 20, 2018, 02:40:18 pm »
Hi, so presented for your consideration...

I'm Ido Gendel, my Youtube channel is "The White Byte" at https://www.youtube.com/user/idogendel/ and I think it's definitely a "Misc"  :) (Arduino, Maker stuff, tutorials, some MCUs, silly experiments etc.)
Currently it has ~1570 subscribers.

It used to be my channel for videos in the Hebrew language, but now it's mixed with English videos, and I'm making sure the titles and playlists reflect the video language. So, does that count?

Thanks,
Maker projects, tutorials etc. on my Youtube channel: https://www.youtube.com/user/idogendel/
 
The following users thanked this post: Cliff Matthews, ez24

Offline SuperGiachi

  • Contributor
  • Posts: 37
  • Country: it
Re: Electronics Resources - YouTube - Websites
« Reply #106 on: January 20, 2018, 08:54:59 pm »
I suggest adding Electronics repair school, motherboard level laptop repairs.
 
The following users thanked this post: ez24

Online Brumby

  • Supporter
  • ****
  • Posts: 12281
  • Country: au
Re: Electronics Resources - YouTube - Websites
« Reply #107 on: January 20, 2018, 11:45:21 pm »
Is this what you were after...?   (sample only)

Looks good !  Did you sort the main list?  I will not do anything except enter data and copy data.

Thanks

I didn't change anything except for the forum code worksheet.

You should be able to add, delete, insert and sort rows in the input data without any risk to the forum code result.  (That is the reason I went with the crazy formula.)  Just don't shuffle the columns around.  (If you do want a column change, then I'll need to sort that for you.)
« Last Edit: January 20, 2018, 11:47:23 pm by Brumby »
 
The following users thanked this post: ez24

Offline HecticZA

  • Contributor
  • Posts: 41
  • Country: za
Re: Electronics Resources - YouTube - Websites
« Reply #108 on: January 21, 2018, 12:17:16 am »
I suggest adding Electronics repair school, motherboard level laptop repairs.
Do you know any?  When I go through the list I will keep this in mind and list any I find.

Thanks for your suggestion
That is the channel name (Electronics repair School)

His methods might have some people cringe though.

:D

Sent from my SM-N950F using Tapatalk

 
The following users thanked this post: ez24

Offline SuperGiachi

  • Contributor
  • Posts: 37
  • Country: it
Re: Electronics Resources - YouTube - Websites
« Reply #109 on: January 21, 2018, 10:14:54 am »
Yes the way he repairs is a little weird but his troubleshooting skills are very good!
 
The following users thanked this post: ez24

Offline HecticZA

  • Contributor
  • Posts: 41
  • Country: za
Re: Electronics Resources - YouTube - Websites
« Reply #110 on: January 21, 2018, 10:28:14 am »
I'm a fairly ignorant Noob and enjoy watching his stuff. I've definitely learned from him.

I sort of understand his view ito time and price point, but man, as a paying customer, some of those repair solutions would leave me upset.

I'm sure it is not a new concept, but I saw for the first time that power was introduced to check for shorts. Previously I would thought that if I suspected a short, I would not bring power close to a board, till I somehow could find the culprit.

Now I wish I have one of those power supplies where you can limit current or where the current draw on a circuit is shown when power is introduced.

I assume you can still check the current draw using other methods, although I haven't figured out how.

The point is, his method of working and thinking has opened up my mind and that everything doesn't necessarily have to be 100% to test a circuit. It is okay to remove a capacitor or resistor or even mosfets or short something in certain circumstances.

The trick is probably to know when you can take those chances.

Sent from my SM-N950F using Tapatalk

 
The following users thanked this post: ez24

Offline witnessmenow

  • Contributor
  • Posts: 32
  • Country: ie
  • Making Youtube Videos on ESP8266
    • My YouTube Channel
Re: Electronics Resources - YouTube - Websites
« Reply #111 on: January 21, 2018, 11:33:43 am »
If it's ok, the description of my channel (Brian Lough) is misc, but something like Arduino would probably be closer to what it was.

I think I had some live streams recording of a making a guitar pedal when I first added the channel here, I've since tidied it up to reflect my usual content

Thanks

Congratulations  :-+ :-+ :-+   You are the first one to ask me to change the info.  It has been kinda discouraging that no one has ask me before.  So you made my day  :-+ 

Do you want me to change General Content to Arduino?  If so what do you want under Addtional Info ?

I get Additional Info from YT "About" page.  Yours is empty.

I will make the changes later - the spreadsheet is currently under work by Brumby

Thanks

 :) I was actually a bit reluctant to ask as I thought I was being a bit dickish!

Arduino would be good, additional info maybe: Videos on projects and libraries, mainly with ESP8266

(not sure if that's too long)

Thanks!

I'll update my channel info too, thanks for letting me know it's blank!
 
The following users thanked this post: ez24

Offline SeanB

  • Super Contributor
  • ***
  • Posts: 16265
  • Country: za
Re: Electronics Resources - YouTube - Websites
« Reply #112 on: January 21, 2018, 01:27:43 pm »
How about Robrenz on the forum, pretty good series of machining videos with some really good precision probes as well.

https://www.youtube.com/channel/UCn4U3aEr6L2nLe1m_3as6JQ

 
The following users thanked this post: Cliff Matthews, ez24

Offline Cliff Matthews

  • Supporter
  • ****
  • Posts: 1910
  • Country: ca
    • General Repair and Support
Re: Electronics Resources - YouTube - Websites
« Reply #113 on: January 21, 2018, 01:45:17 pm »
Agree, apparently members now bypass the 10 video requirement. We could just link to that one video right now and encourage him to make a playlist with that and anything else he might create...?
 
The following users thanked this post: ez24

Offline ez24Topic starter

  • Super Contributor
  • ***
  • Posts: 3082
  • Country: us
  • L.D.A.
Re: Electronics Resources - YouTube - Websites
« Reply #114 on: January 22, 2018, 06:47:58 pm »
How about Robrenz on the forum, pretty good series of machining videos with some really good precision probes as well.

https://www.youtube.com/channel/UCn4U3aEr6L2nLe1m_3as6JQ

He was already on the list.  From now on I am not going to add a members name unless they ask me to add them.
Thanks

List updated and posted.
« Last Edit: January 22, 2018, 10:06:21 pm by ez24 »
YouTube and Website Electronic Resources ------>  https://www.eevblog.com/forum/other-blog-specific/a/msg1341166/#msg1341166
 
The following users thanked this post: witnessmenow

Offline epy

  • Regular Contributor
  • *
  • Posts: 70
  • Country: us
Re: Electronics Resources - YouTube - Websites
« Reply #115 on: January 27, 2018, 12:42:07 pm »
Hi,

I am working on Nextion Display tutorials. Here is my channel..

https://www.youtube.com/channel/UCWBY9ev946OYaS7bUVDGFIg

Thanks...
 

Online Brumby

  • Supporter
  • ****
  • Posts: 12281
  • Country: au
Re: Electronics Resources - YouTube - Websites
« Reply #116 on: February 15, 2018, 01:21:59 pm »
Some mods to increase flexibility and a bit of a clean-up.

<Attachment removed. It has served it's purpose.>
« Last Edit: March 09, 2018, 12:11:26 am by Brumby »
 

Offline grifftech

  • Frequent Contributor
  • **
  • Posts: 369
  • Country: us
    • youtube channel
Re: Electronics Resources - YouTube - Websites
« Reply #117 on: February 26, 2018, 03:43:21 pm »
What happened? why did my channel get removed?  https://www.youtube.com/channel/UCtMQfOVPCWMd3x3k5dtQieg
 

Offline noras

  • Contributor
  • !
  • Posts: 46
  • Country: tw
    • PCB star page
Re: Electronics Resources - YouTube - Websites
« Reply #118 on: March 02, 2018, 07:01:06 am »
Thank you for bringing them together.
 
The following users thanked this post: ez24

Offline Cliff Matthews

  • Supporter
  • ****
  • Posts: 1910
  • Country: ca
    • General Repair and Support
Re: Electronics Resources - YouTube - Websites
« Reply #119 on: March 07, 2018, 12:38:33 pm »
Roger EEVblog user "baltersice" (Marco Reps) channel now seems to be deleted from our YouTubers list.
https://www.eevblog.com/forum/other-blog-specific/a/msg1352598/#msg1352598
FWIW, his channel now ranks quite high at 35,059 subscribers.
 
The following users thanked this post: ez24, witnessmenow

Offline witnessmenow

  • Contributor
  • Posts: 32
  • Country: ie
  • Making Youtube Videos on ESP8266
    • My YouTube Channel
Re: Electronics Resources - YouTube - Websites
« Reply #120 on: March 08, 2018, 03:17:44 pm »
Roger EEVblog user "baltersice" (Marco Reps) channel now seems to be deleted from our YouTubers list.
https://www.eevblog.com/forum/other-blog-specific/a/msg1352598/#msg1352598
FWIW, his channel now ranks quite high at 35,059 subscribers.

If you haven't checked out his videos please, please do, they are so good. Amazing combination of funny and informative.
 
The following users thanked this post: ez24

Offline Simon Spiers

  • Regular Contributor
  • *
  • Posts: 83
  • Country: gb
    • My Youtube channel
Re: Electronics Resources - YouTube - Websites
« Reply #121 on: March 28, 2018, 07:22:39 am »
I wonder if some of you might be interested in my YouTube channel?
I do mainly repairs on old audio gear and dabble in the odd vintage test equipment restoration too.
It might be a bit amateurish  compared with many, but some might find it entertaining.
https://www.youtube.com/channel/UClvsx_04l8H6aoHP4aL_4Xw

Offline Shock

  • Super Contributor
  • ***
  • Posts: 4197
  • Country: au
Re: Electronics Resources - YouTube - Websites
« Reply #122 on: March 28, 2018, 09:43:32 am »
I wonder if some of you might be interested in my YouTube channel?
I do mainly repairs on old audio gear and dabble in the odd vintage test equipment restoration too.
It might be a bit amateurish  compared with many, but some might find it entertaining.
https://www.youtube.com/channel/UClvsx_04l8H6aoHP4aL_4Xw

You were on the original list. Your channel has interesting content, been watching for quite a while now.

Make some playlists and add them to your channel, their script bots will discover your channel and automatically mark you for approval in the new list.

Just kidding, they do all this manually, but it's really fun seeing how complicated a list can get. I was not kidding about making playlists, you need to do that. ;D
Soldering/Rework: Pace ADS200, Pace MBT350
Multimeters: Fluke 189, 87V, 117, 112   >>> WANTED STUFF <<<
Oszilloskopen: Lecroy 9314, Phillips PM3065, Tektronix 2215a, 314
 
The following users thanked this post: ez24

Offline _Wim_

  • Super Contributor
  • ***
  • Posts: 1514
  • Country: be
Re: Electronics Resources - YouTube - Websites
« Reply #123 on: March 28, 2018, 06:28:35 pm »
I wonder if some of you might be interested in my YouTube channel?
I do mainly repairs on old audio gear and dabble in the odd vintage test equipment restoration too.
It might be a bit amateurish  compared with many, but some might find it entertaining.
https://www.youtube.com/channel/UClvsx_04l8H6aoHP4aL_4Xw

Yep, also already on my list and following. Keep up the good work  :-+
 

Offline Simon Spiers

  • Regular Contributor
  • *
  • Posts: 83
  • Country: gb
    • My Youtube channel
Re: Electronics Resources - YouTube - Websites
« Reply #124 on: April 01, 2018, 03:10:47 pm »
Thank you for that info will do. Didnt spot my name on the original but I did only have a fleeting look. Cheers. :-+
 
The following users thanked this post: ez24


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf