Author Topic: Active Low Pass Filter Bode Plot Analysis using Siglent SDS2102X Plus Oscillosco  (Read 794 times)

0 Members and 1 Guest are viewing this topic.

Offline hesam.moshiri

  • Regular Contributor
  • *
  • Posts: 72
  • Country: se
    • MyVanitar
In the second part of the active low pass filter analysis videos, I used the bode plot to analyze the low pass active filter's behavior in practice. There are not many devices that can calculate and demonstrate the bode plot. I used Siglent SDS2102X Plus oscilloscope to plot the bode curve. The cut-off frequency of the filter, in theory, is around 722Hz, however, in practice, the result would be different.



Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf