Author Topic: Dynamic Temperature and Relay Control & Monitoring over WiFi using ESP01  (Read 4055 times)

0 Members and 1 Guest are viewing this topic.

Offline hesam.moshiriTopic starter

  • Regular Contributor
  • *
  • Posts: 142
  • Country: se
    • MyVanitar
To design the schematic and PCB, I used Altium Designer, embedded a DS18B20 sensor to sense the temperature, and a small 5V-10A Panasonic Relay to control an external device. You can power the board using a 5V USB Type-C cable, such as a mobile phone charger or a power bank. I paid attention to supply filtering and decoupling to ensure the stable operation of the device.



Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf