Author Topic: SDGEE #013 Peak Electronics DCA75 Pro Analyser Review and Teardown (Read 62311 times)

PeakAtlas · « **Reply #25 on:** April 20, 2015, 07:40:14 am »

@Edonork Nice pictures, you've done a nice print job.

By the way, I've found that if you use a 2.5mm drill in the base holes then you can use standard M3 screws quite nicely.

ElektroQuark · « **Reply #26 on:** April 20, 2015, 07:42:28 am »

Will try, I have lots of M3 at hand.

By the way, I have remove the unnecesary piece from your STL file before printing.

SteveyG · « **Reply #27 on:** April 20, 2015, 09:22:51 am »

Looks like I need to have a chat with the guys in the machine shop at work

SteveyG · « **Reply #28 on:** May 05, 2015, 09:21:49 am »

HighVoltage · « **Reply #29 on:** May 10, 2015, 08:44:09 am »

SteveyG,
You are doing great reviews!
Thank you.

SteveyG · « **Reply #30 on:** May 12, 2015, 07:41:11 am »

Quote from: HighVoltage on May 10, 2015, 08:44:09 am

SteveyG,
You are doing great reviews!
Thank you.

Thanks for the support!

neslekkim · « **Reply #31 on:** May 13, 2015, 08:39:55 am »

Are you going to review the ZEN50 also?, your reviews are very good commercial for Peak

And, I hope someone can put printed stands on sale somewhere...

ElektroQuark · « **Reply #32 on:** May 13, 2015, 08:51:39 am »

@nesslekkim: there are various online services for 3D printing.
I could print one to you, but shipping breaks the deal.

neslekkim · « **Reply #33 on:** August 18, 2015, 08:26:27 am »

I see that you have the ZEN50 on your bench, any review of that?, and are you happy with it?

i see that they used normal crocs on that one, compared to the hooks on the DCA etc..

For normal diodes/zeners I guess it's ok, but I want to use it for Leds, and think that crocs is not so nice if one want to test leds that are bonded to aluminium pcbs, as most of the cob based ones are.. without soldering wires..
But maybe I'm wrong..

SteveyG · « **Reply #34 on:** August 19, 2015, 07:40:55 am »

I'll try to get a review up soon!

neslekkim · « **Reply #35 on:** August 19, 2015, 08:55:21 am »

Quote from: SteveyG on August 19, 2015, 07:40:55 am

I'll try to get a review up soon!

Cool, can you do a little about leds, cob leds etc also?
I guess I'm going to buy this soon anyway, but it would really be interesting to see how it can be at help there.

PeakAtlas · « **Reply #36 on:** November 12, 2015, 11:35:32 am »

EEVBlog Discount Code

Hi All,

Further to a few requests, on this thread and others, I've now issued a 10% discount code for EEVblog members.

The discount code is:

eevblog10-november

The code is valid for all of November 2015 and gives 10% discount on all product prices for orders that have at least 1 instrument in them. It can be entered during the checkout process in our web store: http://www.peakelec.co.uk

Don't hesitate to get in touch if you have any questions.

Cheers,

Jez

Quote from: EdoNork on April 19, 2015, 04:01:18 pm

Quote from: PeakAtlas on Yesterday at 22:38:37
HBy the way Edonork, if possible, please post pictures of your 3D print when it has finished, I'd love to see it.

Here you have Jez:

I will buy the needed screws tomorrow, but I have test the fit and it is perfect.

Waiting for the Peak Atlas EevBlog discount for the ZEN.

Fraser · « **Reply #37 on:** November 18, 2015, 08:07:09 pm »

Thanks Jez,

I just ordered an ESR70 from your web site. The 10% discount code worked fine.

Best Wishes

Fraser

PA0PBZ · « **Reply #38 on:** November 18, 2015, 08:34:27 pm »

Ordered a DCA75 with payment option PayPal. Please note that you have to fill in the code in the PayPal screen, just typing it on the basket screen is not enough (or doesn't do anything).

Fraser · « **Reply #39 on:** November 18, 2015, 10:24:30 pm »

I entered the code in the basket checkout screen but you have to press the update basket button for the discount to be applied.

Fraser

dadler · « **Reply #40 on:** November 19, 2015, 05:30:54 am »

Already have the DCA75 & ZEN. Due to the coupon code above, I am now considering the LCR45.

I do already have a DER EE DE-5000, but I really like the form factor and interface of the Peak products.

Anyone have both, and can offer insight on the merits of the LCR45 vs DE-5000?

HighVoltage · « **Reply #41 on:** November 19, 2015, 11:06:25 am »

I just ordered the ZEN50,
Thanks for the discount.

neslekkim · « **Reply #42 on:** November 19, 2015, 11:49:32 am »

Quote from: dadler on November 19, 2015, 05:30:54 am

Already have the DCA75 & ZEN. Due to the coupon code above, I am now considering the LCR45.

I do already have a DER EE DE-5000, but I really like the form factor and interface of the Peak products.

Anyone have both, and can offer insight on the merits of the LCR45 vs DE-5000?

Same here, I have the DER EE, wonder what the ESR and the LCR meters would give compared to the DE-5000..
Have the DCA75 and ZEN and very happy with those

dadler · « **Reply #43 on:** November 20, 2015, 05:29:19 pm »

I think I have answered my own question, the specs on the DE-5000 are superior (by an order of magnitude or more) in almost every way vs the Peak LCR/ESR products. I'd expect the Peak devices to be much more usable from a human perspective, and feel less plasticky, though. But, after locating my DE-5000 spec sheet, there isn't much of a comparison.

Edit: adding spec sheets:

DE-5000:

Peak LCR45:

Peak ESR70+:

Fraser · « **Reply #44 on:** November 20, 2015, 09:53:42 pm »

The Atlas ESR70 arrived today. Nice fast next day delivery.

The unit is as expected, well constructed and it works very well. I can tell that it will be very quick to use and the presence of the automatic discharge protection is a very nice function. More LCR and ESR meters should include such. The ESR70 checks the voltage across the Capacitor before connecting the voltage sensitive parts of the unit to it. If excessive voltage is measured, a resistor is used to discharge the capacitor and the display shows the voltage level during the process. Nice.

High levels of accuracy are not essential when measuring ESR as such a characteristic is anything but constant amongst different components. LCR is a different matter. Accuracy can be very important.

I own the Mastech and De Ree LCR+ESR, units and the ESR70 is just a more convenient unit for quick checks. Once the ESR70 has discharged and measured the capacitor, a more accurate meter may be used if the situation warrants such. I have serious doubts that high levels of ESR accuracy will be an issue in most repairs that I undertake.

This unit joins my excellent Atlas DCA75+ on my bench. Time to print another desk stand for it to sit on.

Fraser

all_repair · « **Reply #45 on:** December 02, 2015, 10:27:14 am »

Hoping for another run of discount, some budget to clear this month

PTR_1275 · « **Reply #46 on:** August 08, 2016, 11:31:43 am »

Sorry for bringing up an old thread, but I am looking to add a ZEN50 and SCR100 to my workbench. Jez, is there any chance of getting another discount code. The local distributor over here in Australia doesn't stock the either of the models I am needing.

I do like the reviews of the other Peak gear that has been put up here too, it helped sway me into buying the DCA75 and I haven't looked back.

alin_im · « **Reply #47 on:** April 30, 2017, 09:39:22 pm »

can you please link the microcontroller inside the product please, I cannot find it anywhere

ThaZ · « **Reply #48 on:** February 04, 2022, 10:14:31 pm »

here you go:

https://lygte-info.dk/pic/ComponentTesters/Peak%20DCA75/DSC_7204a.jpg

AwArD_RzD · « **Reply #49 on:** February 10, 2022, 10:12:06 pm »

I bought one this week from Digikey and i want to share that my unit feature a backlight display. I know they update the firmware but it's a great surprise.
Date code 2204 seal date 18 JAN 2022.

Since someone revived this 5 old thread i used this one, it's the first result on many search engine when you search a review for the DCA75 pro, it's a great review SteveyG thanks !


EEVblog Main Site	EEVblog on Youtube	EEVblog on Twitter	EEVblog on Facebook	EEVblog on Odysee

Author Topic: SDGEE #013 Peak Electronics DCA75 Pro Analyser Review and Teardown (Read 62311 times)

Share me