EEVblog > Other Blogs

Trying out my new Keithley DMM7510, a 7.5 digit beast

(1/2) > >>

Circuitous:
New to the lab is this Keithley DMM7510, a 7 1/2 digit, high performance meter.  This beast is amazing!
Here I take a first look at the meter and run a few measurements.

No teardown, since I paid for it!

HighVoltage:
Great first impression Video, Thank you !

Do you have a stable voltage standard and could see the drift of the 7510 over 24 hours
Would be interesting to see the graph for that.

HKJ:
You need something very stable to see the drift of them 7510.
I compared it to a couple of other meters with a cheap voltage standard:


Reference used:

Circuitous:
I finally ran a successful 24 hour test, I'll try to do a longer one some time.



And, here's the setup.  If you see anything to improve the tests, please let me know.

Jay_Diddy_B:
Hi,

You might want to look at using special low thermal emf leads. There is a thread here:

https://www.eevblog.com/forum/buysellwanted/diy-low-emf-cable-and-connectors/

I use Pomona low thermal emf leads with my Datron 1281.

Regards,

Jay_Diddy_B

Navigation

[0] Message Index

[#] Next page

There was an error while thanking
Thanking...
Go to full version