Author Topic: Wavetek 859 Pulse Generator Teardown and Repair  (Read 1970 times)

0 Members and 1 Guest are viewing this topic.

Offline AlphZeta

  • Regular Contributor
  • *
  • Posts: 244
  • Country: us
    • Kerry D. Wong
Wavetek 859 Pulse Generator Teardown and Repair
« on: June 14, 2015, 07:24:55 pm »
I recently did a teardown and repair of a Wavetek 859 50 MHz pulse generator.





This is a really old school pulse generator (made in the 80's), but is still a nice equipment to have in the lab. If you want to read my blog posts rather than watching the video, you can find them on http://www.kerrywong.com.

 

Offline AlphZeta

  • Regular Contributor
  • *
  • Posts: 244
  • Country: us
    • Kerry D. Wong
Re: Wavetek 859 Pulse Generator Teardown and Repair
« Reply #1 on: June 16, 2015, 12:37:35 am »
By the way, does anyone by any chance know the GPIB command format for this unit? It would probably be much easier accessing it through GPIB than via the front panel.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf