Author Topic: PulseAudio Volume Meter. Would like to add VU ticks.  (Read 64 times)

0 Members and 1 Guest are viewing this topic.

Offline Ed.Kloonk

  • Super Contributor
  • ***
  • Posts: 1391
  • Country: au
PulseAudio Volume Meter. Would like to add VU ticks.
« on: July 21, 2020, 12:31:44 pm »
Only applies to you if you run Linux and PulseAudio.

Many years ago, Lennart offered up a volume meter program for PA.

My gui/GTK1.2! skills are stuck in a timewarp just as the aforementioned src.

I use the program to check if my mic is not maxxing out when participating in certain occasional d-live streams.

I'd like to add VU marks to the meters. I'd like to be able to read the live meter and then push the fader on the desk to 0dB to -3dB, on the fly.

I am interested to know you think this src software a dead duck. The thing is, it suits me 85%. For the last 15% for it to be perfect would be to add the VU ticks and possibly rotate it horizontal.

Or do I commit the Cardinal sin and re-invent the wheel?


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo