| Electronics > Projects, Designs, and Technical Stuff |
| 0603 Metric Imperial Confusion |
| << < (2/2) |
| bson:
I'd use imperial sizes down to 0201, then switch to metric and make sure to qualify it as such. As far as I can tell this matches equipment manufacturers as well, at least based on what I've seen at Semicon West. |
| I wanted a rude username:
--- Quote from: NivagSwerdna on October 31, 2019, 08:05:19 pm ---I wonder if there are people who think in metric? --- End quote --- I do (along with the rest of the PCB design unless doing pure through-hole for fun), and it's liberating. The metric sizes precisely encode the device size ... no conversion tables required. But when ordering passives, searching is more effective in imperial. |
| Lunasix:
Some years ago, I ordered capacitors in 0603 size, but didn't seen it was 0603 metric (didn't know...) and received 0603 metric, which means 0201 imperial. Very small ! I always have these capacitors, and will never use them ! Now, before ordering, I verify the unity. |
| I wanted a rude username:
Challenge yourself. >:D 0603 soldered onto pads designed for 1608 (imperial 0603): |
| Gribo:
Meh, try Imperial 0402 and metric 0402 for a challenge. |
| Navigation |
| Message Index |
| Previous page |