Electronics > Projects, Designs, and Technical Stuff
14.4V ground reference for ADC
<< < (30/33) > >>
Arjunan M R:
Can I use 6.3V tantalum capacitor to bypass 5V supply?
Simon:
Just google tantalum capacitors, there will be lots of information. I don't know as i don't use them.
Arjunan M R:


This is what it says on "Voltage Derating Rules for Solid Tantalum and Niobium Capacitors" by AVX.
Simon:
You can probably run closer to maximum with a stable voltage, if you are smoothing a fluctuating voltage you may want more headroom for surges/spikes.
Arjunan M R:
Hi, the LDO i am using (LT3080) needs a minimum output curent of 1mA.I was going to use lm334z as a constant current source.But it is only available in higher quantities.
Can i  use a electronic potentiometer as a constant current source?
Or is there any simple circuits i can use as constant current source?
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod