| Electronics > Projects, Designs, and Technical Stuff |
| 2-3 position Connectors |
| (1/1) |
| rakeshm55:
Hi, Are there any 2 -3 pin connectors which can sustain vibrations board mount Straight vertical. Thru hole Temp grade -40C to 85 or better. use is to connect panel mount switch contacts to board PCB. I could find lock mechanism in digikey. Looking for vibration which meets shock and vibration |
| Nusa:
Latching connectors are everywhere. Often they're tougher than the solder joints on the PCB, or the PCB itself. Unless you quantify shock and vibration, your guess is better than mine as to whether you need something special or not. Do you think you need something that's literally bolted to PCB as well as soldered? |
| beanflying:
Search for JST, JST-XH, JST-XHP or variants on those. Fairly easilly available from 2-8 pins or as a Kit to get started like this eBay auction: #183222237437 Used a lot for model aircraft LiPo battery charing leads so you will also find them with leads already attached which may save time depending on your application or if you don't have a small crimp tool. eBay auction: #302615152624 For more severe vibration there is similar ones with better locking clips again if you think you need them. |
| Navigation |
| Message Index |