Electronics > Projects, Designs, and Technical Stuff
3.5mm headphone jack 3p/4p temperature sensor standard?
(1/1)
mairo:
Hi all,

Is there a standard for the pin-out of a  3.5mm headphone jack 3p/4p when used with temperature sensor, particularly in the power wiring? Mainly 1-Wire based digital sensors, but if there is something for analog ones (e.g. MCP9700 based ..), I am also interested to know.

The only information I found was from iTead on some Sonoff probes:
https://www.itead.cc/wiki/Sonoff_Sensor_Si7021

and some tread in which the circuitry for the power seems flipped when compared to the one from iTead/Sonoff tread above:
 http://rants.dyer.com.hk/rpi/1wire.html

Thank you
aix:
It looks like the first link uses a 2.5mm, not a 3.5mm, connector.

I've seen meat cooking probes also use a 2.5mm connector for the thermistor, but I'm guessing that's not the type of temperature sensor you're after.
Navigation
Message Index
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod