FlipFlop

[modernjack3]

Hello guys ! I am currently trying to safely transfer a high Signal from the last bit of a "SN74HC595N" to the "data in" of another.
My plan is to get the Flipflop "high" when pin 8 is active and "low" when pin 1 of the other one is "high".

So which Flipflop/ part should I use?

[Paul Price]

CMOS CD4013BE or 74HCT4013 or 74HC4074  D-FF

[Paul Price]

Daisy Chaining Shift '595 Registers:

The Shift Registers can be increased by connecting the QH' pin with the second Shift Registers Serial in (PIN 14). Thus the number of output is limited only to the number of Shift Registers that can be connected.

[Wiljan]

Here is an example with 74HC595 in serie
http://www.protostack.com/blog/2010/05/introduction-to-74hc595-shift-register-controlling-16-leds/