| Electronics > Projects, Designs, and Technical Stuff |
| 3PDT Pushbutton switch part find |
| (1/1) |
| belzrebuth:
Hi all, I'm searching for a 3PDT pushbutton for a balanced audio passive mute switch. The diagram of the mute switch is this : https://www.gearslutz.com/board/attachments/geekslutz-forum/331457d1361367895-how-wire-external-xlr-off-switch-pedal-balanced-mute-switches.jpg I've already implemented it using a standard toggle 3PDT switch but I'd like to find a latching pushbutton instead. I can only find the typical stompbox-type foot switches which are hard to press by hand. Has anyone have any idea of a pushbutton switch that could work? I was thinking something like this https://ae01.alicdn.com/kf/HTB1i5fbKVXXXXceXpXXq6xXFXXXU/Factory-Supplied-3-Pcs-2P-SPST-Spring-Loaded-Locking-Push-Button-Switch-5A-40A-250V-AC.jpg_640x640.jpg but ideally I'd want something like a stompbox switch with far lighter toggle force. |
| Gyro:
Silly question, but have you tried looking for 4PDT? - 3 is a bit of an odd number. ;) E.g. https://cpc.farnell.com/search?st=4pdt |
| belzrebuth:
Haven't looked for more than 3 poles because that's also kind of overkill for my application (one set of leads is NC) and my aluminum enclosure is tight enough for a 3PDT to fit in so... EDIT:a DPDT switch could also work; I just happened to have a 3PDT when I was making this so I just used that..There is no need for a 3PDT necessarily |
| Navigation |
| Message Index |