Author Topic: 4 channel IR soldering station/reflow oven controller  (Read 3269 times)

0 Members and 1 Guest are viewing this topic.

Offline boneDragon

  • Contributor
  • Posts: 7
4 channel IR soldering station/reflow oven controller
« on: June 27, 2013, 03:50:56 pm »
This controller can be used for IR repair station, reflow oven, or iron + fan soldering station.




Contains  4 independent channels with PID regulation.
8 profiles with 10 steps, each up to 9999 sec.
Sensors: thermocouples (k-type), or any thermocouple/RTD with LMP90100 amp.
Control from PC via USB-RS232 or Bluetooth with cross-platform software (Win/Lin/Mac).

Controller: standalone, based on STM32VLDiscovery  and simple shield for it:

Shield: schematics, pcb, project on Bitbucket.
View: 1, 2, 3

Thermocouple amplifier (2 channels): sch, pcb, project.

Universal amplifier (LMP90100, 4 channels): sch, pcb, project.

Triacs (2 ch): sch, pcb, project.

Firmware: src, hex, with LMP90100 support.

Soft.

Profile examples: Lukey iron, quartz tubes heater, halogen lamps heater.


Iron/heat gun station
.

Design examples: 1, 2, 3, 4, 5
« Last Edit: June 27, 2013, 04:07:26 pm by boneDragon »
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf