EEVblog Electronics Community Forum

Electronics => Projects, Designs, and Technical Stuff => Topic started by: atwoz on August 21, 2013, 02:30:49 pm

Title: 4 pin (or 3 pin) industrial sensor connector
Post by: atwoz on August 21, 2013, 02:30:49 pm

Hello Everyone,

Can anyone recommend a 4 pin (3 pin could also work) sensor connector? I need the male and female parts. The female connector will be attached to a case. If some sensors goes bad, the idea is to replace it easily. The case will suffer some very light vibration and shock 24/7 during several years.

Thanks!

Title: Re: 4 pin (or 3 pin) industrial sensor connector
Post by: tszaboo on September 01, 2013, 09:08:27 am

M12 or M8 connectors are considered industry standard for sensors. They are extremely sturdy, with locking, one of the best connection system you can use.