Electronics > Projects, Designs, and Technical Stuff
60 pin D-SUB connector
(1/2) > >>
ali_asadzadeh:
Hi,
I'm searching for a 60-70 Pin Right angle D-sub connector that has good shock and vibration specs, also I want it to have some sort of lock mechanism, I prefer Molex, But It seems there is nothing on stock in Digikey or other places, do you recommend any part number or series that has rugged design and can be sourced easily,I need around 20 for now.
Benta:
TE Connectivity AMPLIMITE comes to mind.
ali_asadzadeh:

--- Quote ---TE Connectivity AMPLIMITE comes to mind.
--- End quote ---

Thanks, do you recommend any part number,say for 62 pin version? I need a right angle for the PCB.
Wendy_Preston:
Hi Ali, does it have to be D-sub shape? We have an alternative in our Datamate 3-row series - which comes with jackscrews and good vibration / shock specs. Here is the catalog section for this range:
https://cdn.harwin.com/pdfs/Harwin_PC_Datamate.pdf - 3-row is on pages 130 to 135.
Here is the specification for the range:
https://cdn.harwin.com/pdfs/C005XX_M80_and_M83_Datamate_Series_Connectors.pdf
If you want further assistance, our Experts would love to help you https://www.harwin.com/contact/ask-an-expert/
Hope that helps!
ali_asadzadeh:
Thanks Wendy for the info,
I want to put this connector in a PCIexpress card along an Ethernet connector,so I prefer D-SUB, But your connectors seems good to me too, and I have used them before,
Does these ones also protected for humidity too? they need to have good shock and vibration and humidity specs :'(
my Total space for this connector is around 70mm, and I need at least 62 connections, so which part number do you suggest? also what sort of prices should I expect.
Navigation
Message Index
Next page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod