EEVblog Electronics Community Forum
Electronics => Projects, Designs, and Technical Stuff => Topic started by: oz2cpu on March 31, 2022, 09:25:25 am
-
https://youtu.be/wU6uBEVIUiY
just got this one.. it is a FIXED 6kV regulated supply at no load, with variable current limit and CC mode,
its current settings go from uA all the way to 225mA !!
since it provide both voltage and current feedback to the CPU
it should be a great project to remove the CPU, add an arduino, and make it into a variable regulated voltage supply
(yes i do work with hightvoltages and know what i am doing, else this is a clear DO NOT AT ALL)
I also just got another one, that is all ready variable voltage, but it is only 4.7kV and much less current
it is explained here
https://youtu.be/dfxF4nhGVQc
my old variable 10kV is broken many years ago, it was impossible to get into the high voltage parts to perform repairs
since they potted it with the most hard epoxy