| Electronics > Projects, Designs, and Technical Stuff |
| Adapter Box for (all) your Lab needs |
| << < (7/8) > >> |
| t1d:
--- Quote from: newbie666 on January 09, 2019, 08:55:45 am ---The files are on his github: https://github.com/dangrie158/AdapterBox --- End quote --- Doh, I must have missed that. Thank you, for the pointer. Edit: Those seem to be only the gerbers. Any chance of getting the source files? I would like to make some modifications... To use the components I have on hand, for example. I think I might add a switch to bring the LED in and out of line, too. I am already gathering components out of their bins <g>. |
| dangrie:
--- Quote from: newbie666 on January 09, 2019, 08:55:45 am ---The files are on his github: https://github.com/dangrie158/AdapterBox --- End quote --- Thanks for pointing that out, didn't have time to respond until now... The current HEAD in the master branch should alwyas point to the latest non-development version (pass DRC, ERC, consistent BOM, renders, etc...) |
| newbie666:
Board directory contains both .sch and .brd files (Eagle): https://github.com/dangrie158/AdapterBox/tree/master/Board @dangrie: awesome project docs, I think I'll build myself one as well, I'm just thinking about swapping usb-a for usb-c connector |
| t1d:
--- Quote from: newbie666 on January 09, 2019, 09:22:47 am ---Board directory contains both .sch and .brd files (Eagle): https://github.com/dangrie158/AdapterBox/tree/master/Board @dangrie: awesome project docs, I think I'll build myself one as well, I'm just thinking about swapping usb-a for usb-c connector --- End quote --- Thanks, again, for the additional pointer. But, I am not seeing what I expected... I thought that I would just be able to download the board and schematic files. However, I seem to be finding their actual code. I know how to plug the files into a project, but I do not know how to deal with the code. A little help, please and thank you... |
| newbie666:
you need to: - either clone the repo (in terminal type "git clone https://github.com/dangrie158/AdapterBox.git") - in main repo directory on github (https://github.com/dangrie158/AdapterBox) click on green clone or download button and then select Download ZIP either way you'll have all the files on your PC / Mac. Then navigate to the Boards folder and you can open the files in eagle as usual. |
| Navigation |
| Message Index |
| Next page |
| Previous page |